Your position: > Technical > FAQ >

Using and maintenance of generator battery

2015-07-21 13:03      Click:

Using and maintenance of generator battery :

1, for safety should be put on in the maintenance of battery acid apron and wear the mask or goggles, once accidentally splashed down electrolyte on skin or clothing, should rinse immediately with plenty of water.

2,storageBattery in just random served when the user is doing, therefore before use, should join has the correct proportion of mixing (1:1. 28) electrolyte.Unscrew the battery case a top, slowly injecting electrolyte until the upper metal between two scale line and try to close to the upper scale line.After add good, please don't use immediately, should let the battery park for about 15 minutes.

3, in the first time to recharge the battery, should pay attention to continuous charging time should not exceed 4 hours,The charger Charging time is too long forstorageThe service life of the battery damage.

4, when one of the following conditions, charging time allows extended appropriately:

5,storageBattery storage time more than 3 months, charging time for 8 hours

6, persists for more than 30 ℃ environment temperature (86 ° F) or relative humidity higher than 80% continuously, charging time is 8 hours

7, such asstorageBattery storage time more than 1 year, charging time for 12 hours

8, at the end of the charging line, should check the electrolyte level, enough when necessary to join the correct proportion standard electrolyte (1:1. 28).

Dongguan Tuangcheng automation equipment co., LTD. Remind you: here you arestorageBattery, should first open the battery filter cap or vent cover, and check the electrolyte level, with distilled water to adjust when necessary.In addition, in order to prevent closed to make a long timestorageBattery case pollution gas not discharge in time and avoid water at the top of the inside of the cell walls of condensation, it should be paid attention to special vent open, to ease the flow of air is appropriate.

Dongguan Tuancheng automation equipment Co., Ltd. all rights reserved.
Sales Phone: 86-769-23162896 Fax:86-769-23162896-609、23166296