Your postion: > Dynamic news > Industry news >

LIXISE generator automatic control module

2016-12-23 09:43      Click:

LIXISE generator automatic control module


Generator automatic control module is also called the generator controller for the speed of the generator and the active power, voltage and power, as well as various operation and protection device of automatic control.Generator is an energy conversion device, it put the steam turbines and turbine prime mover's mechanical energy into electricity, then through transmission and distribution network to the user.In modern power system, power generating sets are mostly parallel operation, not only requires the unit itself good performance, reliable operation, and also requires a reasonable distribution of between each unit, the active and reactive power load of power grid in order to realize the most economical operation of the entire grid.These requirements are centrally reflect in the generator speed and voltage regulating of the two subsystems.Active power control system mainly depends on the regulation of generator active power of prime mover speed regulation system (see steam turbine control system).In order to guarantee the stability of the generating set parallel running speed, there should be a drooping characteristics according to the characteristics of the differential coefficient is commonly 2 ~ 6%, the regulating performance of discrete degree (the difference between the actual characteristics of speed control and linear) should be as small as possible, and can according to the need of economic operation of the power grid by changing the speed control system of a given value (speed or power) transfer or that is assigned to the power grid.

LXC66X0E series power station automation controller used for a single diesel generating sets automation and monitoring system, using 32-bit microprocessor technology, the realization of generating set automatic starting/stopping, various parameters precision measurement, alarm, protection and the "three remote" function.Big screen LCD controller USES a (240 * 128 LCD) graphic display, under a page can show that almost all of the important parameters, dispense pages.At the same time can show Chinese, English and other languages, all parameters can be adjusted from the controller panel, also can use PC through USB, RS232 or GPRS remote adjusting and monitoring.Its compact structure, simple connection, high reliability, can be widely used in various types of generating set automation system, can also be used for fire pump, air compressor of automation control system

Performance and  characteristics

LXC6110E: used in single machine automation, through the remote start signal control generating set from the start stop;

LXC6120E: on the basis of LXC6110E increased mains power monitoring and mains/power automatic switch control function (AMF), especially suitable for the single machine automation system consisting of mains unit all the way all the way

Custom boot interface functions

Allows the user to choose according to their own needs boot interface, change into your own LOGO and company name, contact phone number, etc., a better brand, also reveal the company's honor.

Custom maintenance reminder functions

Users in the use of the unit in the process, usually do not deliberately to remember maintenance cycle of the unit, it will shorten the life of the unit, the failure rate increases, in line with the generator also enjoy the healthy concept of life, in this upgrade, LIXISE added three custom maintenance for everybody to remind function,

Manufacturers can also set the 1st level maintenance according to the different maintenance level, level 2 maintenance, 3rd level maintenance.Not only can the maintenance reminder according to the operation of the engine maintenance cycle time calculation, can also according to the longest place maintenance cycle time calculation, with double insurance to ensure the healthy operation of the unit.

The average load rate

Let your customers know, units in the daily operation of the average load rate, avoid load rate is too high to reduce service life

The average load rate = the crew operation capacity/unit (the running time, idle time) X 100%

The installment payment service

Chinese and English language menu to select, large screen LCD display.

For 240 x128 LCD liquid crystal display (LCD), with backlight, Chinese, English and other languages optional interface.More important is can show that most of the parameters under a page, dispense frequent switching page views, very convenient, all parameters can be to use the computer through USB, RS232 and RS485 interface connection and adjust, within the internal FLASH memory in the controller at the same time, also is not lost in when the system is powered off.

Fault recording function

Historical fault record 200 article, can record the moment in a warning or fault occurring oil pressure, water temperature, voltage, current, power and other important parameters, easy to analyze the reason and repair, and real time clock, regular maintenance function, can be used to pump unit, also can do indicating instrument used (only indication, alarm, relay no action);Have three groups of maintenance function, can be set up for the machine maintenance cycle.Maintenance time to action can be set up (warning or alarm stop

Service advantage

Implementation secondary accessories sales - maintenance reminder

Through health examination, found that users early failure of the unit in time, to remind the user to do maintenance.It is recommended to use original parts, the realization of the secondary parts and service sales.

Through the part life cycle management, timely remind consumer to do maintenance.It is recommended to use original parts, the realization of the secondary parts and service sales.

Lowering the cost of after-sales service to improve after-sales service

 after-sales service cost, the use of remote fault diagnosis of patent technology, avoid excessive travel services and problem caused by user error operation or improper operation and business, and even can with the help of the user, directly remote solve some fault

Improve the quality of after-sales service, the unit fails, through the remote fault diagnosis, quickly find the cause of the problem, and inform the recent maintenance (maintenance workers to repair, fast and accurate fault solution.

At any time tracking after-sale - after-sales service process management

By mobile phone APP to provide after-sales service process management, the after-sales service process node and personnel management into the after-sales service management system, the real-time progress update, improve service quality, reduce the service cost.


Dongguan Tuancheng automation equipment Co., Ltd. all rights reserved.
Sales Phone: 86-769-23162896 Fax:86-769-23162896-609、23166296